Table of Contents
Advertisement
1
SK1
version screen
SK1
Z_SYSTEM_MEN
system screens
1) subprogr. = traversing program for FM 453
Fig. 8-3
Menu Tree of the OP 17 User Interface, continued
Figure 8-2 describes the functions of the global function keys for the user
interface of the OP 17.
ESC key
K5
Function key
Function key
K6
Function key
7 K
Function key
8 K
Function key
14 K
Function key
15 K
Function key
16 K
F1
F8
–
Note
If all three channels are not used, the relevant softkey (K14 to K16) in the
configuration example should be deleted.
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Actual value display
SK3
PIC71
1)
subprogr.
Overview
F7
SK3
test screen
You can use this key to call up the previous screen of the higher level (the
table of contents in the main screen).
You can use this key to jump from any point on the menu tree to the main
screen (PIC7_G).
You can use this key to jump from any point on the menu tree to the diagnos-
tics error message screen (PIC77).
You can use this key to jump from any point on the menu tree to the operat-
ing mode selection screen (PIC75).
You can use this key to switch to the actual value display (PIC7).
You can use this key to switch to channel 1.
You can use this key to switch to channel 2.
You can use this key to switch to channel 3.
F1 to F8 (local soft keys)
Man-Machine Interface
PIC7
SK5
PIC71a
1)
subprogr.
Edit
PIC7112
PIC71a1
8-5
Advertisement
Table of Contents
