Table of Contents
Advertisement
Defining Parameters of the FM 453
Display/Delete
SDB in the S7
Project
Fig. 5-10 Displaying/Deleting SDB
Loading the SDB
When you have created the SDB, you must load the "system data" of the
in the CPU
project into the CPU.
There are two ways of proceeding:
1. First method
2. Second method
You can also program the memory card for the CPU on a programming de-
vice/PC.
If the configuration is loaded from HW-CONFIG, this SDB is not loaded into
the CPU.
5-32
Select menu File
Display SDB
All SDBs for FM 453 of the project are
displayed
Delete SDB?
Select SDB and delete
Select the online window in the SIMATIC Manager (the online and offline
windows must be open)
Copy the system data from the offline project in CPU\S7-Pro-
gram\Blocks\System data into the online project (drag with the mouse
or select Copy/Paste).
Select the system data in the SIMATIC Manager in CPU\S7-Pro-
gram\Blocks\System data.
Activate the menu Target system Load (or the right mouse button) to
load the system data into the CPU
or
Use the menu Target system Load in EPROM memory card on CPU
No
Close the
window
Yes
1 000
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Advertisement
Table of Contents
