Siemens SIMATIC FM 453 Manual page 3

Preface
Purpose of this This manual contains all information about the FM 453 module:
Document
Information Blocks
The following information blocks describe the purpose and uses of this
in this Manual
manual:
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Hardware and functions
Parameter definition
Man-machine interface
S7 function blocks
Safe setup
Product overview of the module (Chapter 1)
This section explains the purpose and possible applications of the module.
It provides introductory information about the FM 453 and its functions.
Basic principles of positioning (Chapter 2)
Here you will find introductory information on positioning methods and
associated definitions of terms.
Installing and removing the FM 453 (Chapter 3)
Explains the installation and removal of the FM 453.
Wiring the FM 453 (Chapter 4)
Describes the connection and wiring of drives, encoders and digital input/
output modules.
Defining parameters of the FM 453 (Chapter 5)
Describes the parameterization and functions of "Parameterize FM 453."
Programming the FM 453 (Chapter 6)
Describes how to program the FM 453 with STEP 7.
Starting up the FM 453 (Chapter 7)
Describes startup procedures for the FM 453.
Human-machine interface (Chapter 8)
Describes the various options for operating and monitoring the FM 453,
and which data and signals can be used and monitored.
iii