Table of Contents
Advertisement
Troubleshooting
Table 11-8
General Data Errors, Machine Data Errors, Traversing Program Errors, continued
Cl.
No.
General data errors
4 (04) 13 (0D)
Digital output not possible
Cause
Effect
Elimina-
tion
4 (04) 14 (0E)
Request application data incorrect
Cause
Effect
Elimina-
tion
4 (04) 15 (0F)
Teach In, program number incorrect
Cause
Effect
Elimina-
tion
4 (04) 16 (10)
Teach In, block number incorrect
Cause
Effect
Elimina-
tion
4 (04) 17 (11)
Teach In, dwell time or subprogram-request in block
Cause
Effect
Elimina-
tion
4 (04) 18 (12)
Teach In, no axis stoppage
Cause
Effect
Elimina-
tion
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
11-24
Error Message,
Error Analysis and Elimination
Error response: "Warning" see Table 11-2
Output not available for direct output of the user program.
Output is not executed.
Correct user program.
Correct parameterization of the output assignment within the
MD35 to the desired assignment.
Incorrect request code.
Old application data are retained.
Request code 0-6, 16-23 and 25 possible.
The program was not parameterized or read in.
Teach In is not executed.
Parameterize and read in program or correct program number.
The block number in the program selected is not in place.
Teach In is not executed.
Specify correct block number.
The block number in the program selected is not in place or incor-
rect block number was selected.
Teach In is not executed.
Specify correct block number.
Axis is still in motion.
Teach In is not executed.
Stop axis and repeat task.
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Message/
Display
CBS
or
DB
DB
CBS
or
DB
DB
CBS
or
DB
DB
CBS
or
DB
DB
CBS
or
DB
CBS
or
DB
DB
Advertisement
Table of Contents
