Table of Contents
Advertisement
Man-Machine Interface
Summary
In this chapter you'll find an overview of the operator-control and monitoring
capabilities offered by the FM 453.
For operator control and monitoring of the FM 453, a control panel can be
connected to the CPU via the MPI interface (see Figure 1-1).
The module uses the SIMATIC interface (backplane bus) to communicate
with the control panel.
Fig. 8-1
Operator Control
The data and signals that can be controlled and monitored at the control
and Monitoring of
panel are listed in the user data block. These data or signals must be pro-
FM Data/Signals
cessed by the user program.
on the CPU
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
e.g., Line-oriented op-
erator panel (OP)
Configured operator-
control screens
Operator control and monitoring
via the MPI interface
CPU
Backplane bus
User data
(user data block,
technology
functions
Section 6)
Operator Control and Monitoring for the FM 453
Operator panel
(OP)
FM 453
in data blocks:
Machine data
Increments
Tool offset data
Traversing pro-
grams
Status messages
8
8-1
Advertisement
Table of Contents
