Siemens SIMATIC FM 453 Manual page 335

Table 11-7 Travel Errors, continued
Cl. No.
Travel errors
3 (03) 28 (1C) M2/M30 missing
Cause
Effect
Elimina-
tion
3 (03) 30 (1E) Digital input not parameterized
Cause
Effect
Elimina-
tion
3 (03) 35 (23) Tool offset value not in place
Cause
Effect
Elimina-
tion
3 (03) 36 (24) Set actual value on the fly, incorrect value
Cause
Effect
Elimina-
tion
3 (03) 37 (25) MDI block on the fly, incorrect syntax
Cause
Effect
Elimina-
tion
3 (03) 38 (26) MDI block on the fly, incorrect velocity
Cause
Effect
Elimina-
tion
Cl. = Detail event class, No. = Detail event number, CBS = Checkback signals, DB = Data block
Note: Value (xx) = Hexadecimal notation of the error number.
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Error Message,
Error Analysis and Elimination
Error response : "Feed STOP" see Table 11-2
In the last program, block, no M2, M30 or M18 is pro-
grammed.
The last program block is a skip block.
Per causes.
For traversing with set actual value on the fly (G88, G89), external
block change (G50) or measurement, no digital input necessary for
that purpose is parameterized.
The functions are not started.
Parameterize the digital inputs by way of MD34.
No tool offset values are available on the FM 453 or tool offsets are
accessed and modified when an override is active.
Parameterize and read in tool offset values
Value is no longer within the range 10
Input a correct value
Incorrect M or G commands or incorrect block structure.
Input a correct MDI block.
Velocity not within the range between > 0 and max. allowable tra-
verse velocity (500 000 000 MSR/min).
Input a correct MDI block.
Troubleshooting
Message/
CBS
CBS
CBS
CBS
9
CBS
CBS
Display
11-19