Defining Parameters Of The Fm 453; Fig. 5-1 Overview Of Parameterization - Siemens SIMATIC FM 453 Manual

Defining Parameters of the FM 453

Summary This chapter gives you an overview of how to define the parameters of the
FM 453 with the "Parameterize FM 453" tool.
S7-400
CPU
User
data block
(1 DB per chan-
nel)
MPI
PG
(STEP 7)
Setup.exe
Fig. 5-1 Overview of Parameterization
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
FM 453
P bus
Data blocks (DB)
DB-MD
DB-SM
K bus
DB-TO
DB-NC
(1 DB per channel)
HW-CONFIG
Parameter-
ization forms
Configuration: Generate system data
Parameterization tool
"Parameterize FM 453"
Function blocks
Preconfigured user interface for OPs
5
Online (editing in the
Target system menu
and selection of the On-
line processing option;
see Table 5-9)
Offline (editing in the File
menu; see Table 5-9)
Rack parameterization -
Group selection - Acti-
vate interrupts (basic pa-
rameters)
Module parameterization
5-1