Table of Contents
Advertisement
Product Summary
Parameterization
In the parameterization, the following control modes can be set:
of the Control
Modes
Digital Inputs/
Four digital inputs and four digital outputs for each channel can be used spe-
Outputs
cifically to a given application.
You can connect:
The switching function is assigned to a given I/O number by way of the ma-
chine data.
Settings and Func-
Special functions can be activated by specific settings in the user program,
tions Not Depen-
in addition to the mode (e.g. measurement on-the-fly, retrigger reference
dent on Operating
point, etc.).
Mode
Software Limit
The operating range (specified by software limit switches) is automatically
Switches
monitored after synchronization is recorded.
Process Interrupts
Process interrupts are triggered by such events as:
Process interrupts are selected by way of machine data.
Block Sequence
Automatic processing of a traversing program, including subprograms
Control
created during the parameterization process. A number of traversing pro-
grams are available for execution on the module.
Diagnostics and
Startup and ongoing operation of the module are monitored by fault and diag-
Troubleshooting
nostic interrupts. Faults or errors are reported to the system and displayed by
the LEDs on the module.
Data Storage on
Parameterization data (machine data, tool compensation data, traversing pro-
the FM 453
grams and increment sizes) is retained in storage on the FM 453.
1-10
Servomotor with servo position control
Stepper motor with servo position control
Stepper motor without servo position control
Reference-point switches
Switches for external starting
Touch probes
Position reached, Stop ("PEH")
Forward/backward rotation
Position reached
Length measurement completed
On-the-fly block change
Measurement on-the-fly
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
Advertisement
Table of Contents
