Fig. 4-6 Connecting A Simodrive 611-A Drive Unit - Siemens SIMATIC FM 453 Manual

Connecting cable
The connecting cable is a cable set for three channels with an analog inter-
face. The terminals are identified for SIMODRIVE drive units.
Order No.:
The connecting cable is available in a variety of lengths.
see
The following Figure shows you how to connect an FM 453 with a
SIMODRIVE 611-A drive unit.
Fig. 4-6
FM 453 Servo Drive / Step Drive Positioning Module
C79000-G7076-C453-01
6FX2 002-3AD01-1
Order No.: E86060-K4490-A001-A4.
Connecting cable
SIEMENS
SIMODRIVE
Connecting a SIMODRIVE 611-A Drive Unit
Wiring the FM 453
X5
FM 453
READY2 (channels 1 to 3)
Drive unit, e.g. SIMODRIVE 611-A
4-13