Output Tray; Small" Originals; Scanner Dry - Minolta Di250 Manual

4

Output Tray

Select either the "1(st bin)" or "2(nd bin)" for output when the copier is
equipped with a Job Tray, Finisher, or Mailbin Finisher.
The initial setting is:
"1" for PC prints and "2" for copies with the Job Tray.
"2 (Elevator Tray)" for PC prints with the Finisher or Mailbin Finisher.

"Small" Originals

Select whether to enable ("ON") a copy cycle or not ("OFF") when it is
initiated by pressing the Start key with no originals placed on the Original
Glass or with an original smaller than the detectable size placed on the
Glass in the Auto Paper mode.
If this function is turned "ON," the copy cycle is run using the paper loaded
in the default paper source. If turned "OFF," a warning message appears
to instruct the user to select the paper.
The initial setting is "ON."

Scanner Dry

Set the time for automatically dehumidifying the Scanner. Any value up to
24 hours may be set in 1-min. increments.
4-8
Using the Utility Mode
Di250/Di350