Counter Removal; Intelligent Sort; Energy Saver - Minolta EP2050 Operator's Manual

136
4. User's Choice

Counter Removal

Determines whether to initialize the copier ("Panel Reset") or not ("Panel Not
Reset") when the Plug-In Counter is pulled out after a copy cycle has been run
using the Plug-In Counter.
Counter Removal:
Panel Reset
Panel Not Reset
The initial setting is "Panel Reset."

Intelligent Sort

Specifies whether to enable ("YES") or disable ("NO") the function that
automatically switches between the Sort and Non-Sort Mode under either of the
following conditions when the copier is equipped with a Sorter or Staple Sorter
and a Duplexing/Automatic Document Feeder.
<Condition>
The copy cycle is initiated using a single original in the Sort Mode.
The copy cycle is initiated to make two or more copies using two or more
originals in the Non-Sort Mode.
Sort / Non-Sort
Auto Change:
YES NO
The initial setting is "YES."

Energy Saver

Selects whether to set ("YES") the copier into the Energy Saving Mode after a
given time after a copy cycle has been completed or a Key operated, or not
("NO").
The time it takes the copier to enter the Energy Saving Mode can also be set
from 1 to 10 minutes. For this setting, use the Multi-Copy Keys.
Energy Saver:
YES
NO
The initial setting is "NO."
1136P412CA
1136P413CA
( min)
1136P546CA