(7)
Removal of IR Cooling Fan Motor 2
1. Remove the IR Right Cover.
2. Remove the Original Glass.
3. Remove the Control Panel.
4. Remove the IR Lower Front Cover, IR Front Cover, and IR Rear Upper Cover.
5. Remove the optical cover.
5. Remove the tension spring for the Scanner Motor
timing belt.
4004D028AA
6. Remove the harness from one cord clamp and
one edge cover.
7. Remove three screws and the Scanner Motor
Assy.
4004D029AD
8. Remove two screws and the Scanner Motor.
4004D030AA
6. Remove three screws and the Imaging Process-
ing Lid on the right inside the IR.
4004D002AB
D-27