When The Message "A Paper Misfeed Has Been Detected." Appears; Misfeed Location Displays - Minolta EP2080 Operator's Manual

112

4. When the Message "A paper misfeed has been detected." Appears

Misfeed Location Displays

Different procedures are used to clear a misfed sheet of paper depending on the location. First,
isolate the location, then clear the misfeed according to the procedure applicable to the misfeed
occurring at that particular location.
A blinking dot "O" indicates that there is a misfeed at that location. A lit dot "O" indicates that
there might be a sheet of paper stopped at that location.
Copier p. 113
Paper Feed Cabinet
Automatic/Duplexing Document
Feeder p. 119
p. 116
If a paper misfeed occurs during a
copy cycle, the message shown on the
left appears and that particular copy
cycle is stopped in the middle of
operation.
Clear the misfed sheet of paper
according to the procedure given
below.
Multi Bypass Tray
Duplex Unit p. 118
Sorter/Staple Sorter
p. 115
p. 121