114
4. When the Message "A paper misfeed has been detected." Appears
Misfeed Location Displays
Different procedures are used to clear a misfed sheet of paper depending on the location. First,
isolate the location, then clear the misfeed according to the procedure applicable to the misfeed
occurring at that particular location.
A blinking dot "O" indicates that there is a misfeed at that location. A lit dot "O" indicates that
there might be a sheet of paper stopped at that location.
Copier
p. 115
1149O252AA
Duplex Unit
p. 120
Automatic/Duplexing Document
Feeder
p. 122
1149O387CA
Multi Bypass Tray
1149O251AA
1149O254AA
1149O255AA
If a paper misfeed occurs during a
copy cycle, the message shown on the
left appears and that particular copy
cycle is stopped in the middle of
operation.
Clear the misfed sheet of paper
according to the procedure given
below.
Paper Feed Cabinet
p. 117
Large Capacity Cassette
Sorter/Staple Sorter
p. 118
1156O061AA
p.121
1156O006AA
p. 124
1149O256AA