Table of Contents
Advertisement
6.
When the Call-Tech.-Rep. Indicator Lights Up
Auto
Photo
Lighter
Auto / Photo
A
Resetting the Call-Tech.-Rep. Indicator
Open the Front Door, then close it.
1
This will reset the Call-Tech.-Rep.
Indicator.
NOTE
Carry out this procedure with the
Power Switch turned ON.
If the Call-Tech.-Rep. Indicator lights up
again, call your Technical Representative
immediately.
0.5~2.0
A4
A3
B4
A3
A3
A4
Full Size
B4
A4
A4
Darker
A3
A4
A5
Full Size
1151O076DA
When a malfunction occurs in the copier, the
Call-Tech.-Rep. Indicator lights up and the
corresponding malfunction code appears across
the Zoom Ratio Indicator and Multi-Copy
Auto
Display. At this time, the Start Key turns to
orange and you cannot start a new copy cycle.
Try to clear the Call-Tech.-Rep. Indicator by
Paper
following the instructions below.
NOTES
When calling your Technical
Representative, give him or her the
malfunction code shown across the
Zoom Ratio Indicator and Multi-Copy
Display.
<Example> Malfunction Code: C0010
After calling your Technica
Representative, turn OFF the Power
Switch and unplug the power cord.
0.5~2.0
1151O066AA
1151O066AA
77
Advertisement
Table of Contents
