3-5.
ELECTRICAL/IMAGE ADJUSTMENT
(1)
Accessing the Tech. Rep. Mode
1. Press the Utility key.
2. Touch [Meter Count].
3. Press the following keys in this order:
Stop → 0 → 0 → Stop → 0 → 1
(2)
Producing a Test Print
1. Call the Tech. Rep. Mode to the screen.
2. Touch [Test Print].
3. Select the desired test pattern type.
4. Make the necessary settings.
5. Press the Start key.
✽ Press the Stop key to terminate the Test Print function.
D-68