Cleaning Of The Pc Drum Charge Corona Grid Mesh; Cleaning Of The Comb Electrode; Cleaning Of The Image Transfer/Paper Separator Coronas Wires - Minolta EP1054 General Instructions Manual

(2) Cleaning of the PC Drum Charge Corona Grid Mesh

(3) Cleaning of the Comb Electrode

(4) Cleaning of the Image Transfer/Paper Separator Coronas Wires

1. Blow all foreign matter off the Grid with a blower
brush.
NOTE
If the blower brush is not effective in cleaning the Grid,
use a soft cloth dampened with alcohol to clean seri-
ous contamination.
1139D178AA
1. Clean the Comb Electrode using the Corona Unit
Cleaning Lever.
1139D179AA
1. Clean the Image Transfer Corona Wire using the
Corona Wire Cleaning Lever.
1139D220AA
2. Remove the four Paper Guides.
3. Dampen a soft cloth with alcohol, hold it with a pair
of tweezers, and wipe the Paper Separator Corona
Wire gently in one direction.
(Go from the hook to spring end.)
1139D180AA
D-38