Misfeed Clearing Procedures Copier (Fusing/Transport Section); When The Message "A Paper Misfeed Has Been Detected." Appears - Minolta EP2080 Operator's Manual

Misfeed Clearing Procedures
Copier (Fusing/Transport Section)
NOTE
Be careful not to touch the areas
marked with
Caution: HOT
Open the Front Door. Turn the Lock
1
Release Lever counterclockwise to
unlock and swing up the Upper Half of
the copier. Then lock Stopper M2 .
Holding up Fusing Unit M1 , pull out
2
the sheet of paper in the direction of
the arrow.
CAUTION
The Fusing Unit and its surrounding areas
may be extremely hot. DO NOT touch any
part except the Fusing Unit Handle (yellow).
Remove any sheet of paper from the
3
transport section.

4. When the Message "A paper misfeed has been detected." Appears

and
High Voltage
with bare hands.
Slightly lift up the Upper Half of the
4
copier and unlock Stopper M2 .
Gently swing down and lock the Upper
Half of the copier. Then, close the
Front Door.
113