Removing The Slimline Odd From The Multibay Box - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

12.5.3.3 Removing the slimline ODD from the Multibay box

Ê Remove the defective slimline ODD from the Multibay box as described in
section "Removing the slimline ODD from the Multibay box" on page
12.5.3.4 Removing the LSD module from the Multibay box
Ê Remove the defective LSD module from the Multibay box as described in
section "Removing the LSD module from the Multibay box" on page
12.5.3.5 Installing the slimline ODD into the Multibay box
Ê Install the new the slimline ODD into the Multibay box as described in section
"Installing the slimline ODD into the Multibay box" on page
12.5.3.6 Installing the LSD module into the Multibay box
Ê Install the new LSD module into the Multibay box as described in section
"Installing the LSD module into the Multibay box" on page
12.5.3.7 Installing the Multibay box
Ê Reinstall the Multibay box as described in section
box" on page 557.
12.5.3.8 Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê Verify if your backup software solution requires additional configuration after
installing, removing or replacing an accessible drive as described in section
"Verifying and configuring the backup software solution" on page
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Accessible drives
569.
555.
"Installing the Multibay
139.
563.
565.
569