12.6.2 Removing the slimline ODD or LSD
Upgrade and Repair Unit
(URU)
Tools: tool-less
12.6.2.1 Preliminary steps
"Removing backup and optical disk media" on page 129
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
"Opening the server" on page 68
Ê
I
The front cover only needs to be removed in order to install
accessible drive dummy covers (see section
drive dummy covers" on page
reinstalled after removing the slimline ODD or LSD module, skip this
step.
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
12.6.2.2 Removing the 2x 3.5-inch HDD extension box
Ê Remove the 2x 3.5-inch HDD extension box from installation bays 2 and 3
as described in section
page
291.
TX300 S8 / RX350 S8
"Removing the 2x 3.5-inch HDD extension box" on
Upgrade and Maintenance Manual
Average task duration:
10 minutes
"Installing accessible
548). If the HDD extension box will be
Accessible drives
579