Removing The Front Panel Module - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

13.1.2 Removing the front panel module

13.1.2.1 Removing front panel cables from the system board
Figure 466: Disconnecting the front LAN board
Ê If applicable, disconnect the front LAN board from the system board:
Ê Press in on the locking latch on the front LAN board holder (1, see close-
up).
Ê While holding the locking latch pressed, pull the front LAN board out of
its socket (2).
Figure 467: Disconnecting the front LAN cable
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Front panel and external connectors
603