Installing The Tpm Board - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

14.3 Trusted Platform Module (TPM)
This section provides information on how to install, remove or replace the
Trusted Platform Module (TPM).

14.3.1 Installing the TPM board

Field Replaceable Unit
(FRU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Bit screw driver
– TPM bit insert
( )
* For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)
14.3.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 125
Ê
"Locating the defective server" on page 57
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page 81
Ê
TX300 S8 / RX350 S8
( )
*
Upgrade and Maintenance Manual
System board and components
Average task duration:
10 minutes
"Opening the server" on
661