Replacing The Onboard Sas Enabling Key - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

System board and components

14.4.3 Replacing the onboard SAS enabling key

Upgrade and Repair Unit
(URU)
Tools: tool-less
14.4.3.1 Preliminary steps
"Suspending BitLocker functionality" on page
Ê
"Locating the defective server" on page
Ê
"Shutting down the server" on page
Ê
"Disconnecting the server from the mains" on page
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page
Ê
14.4.3.2 Replacing the onboard SAS enabling key
"Removing onboard SAS enabling key" on page 677
Ê
"Installing the onboard SAS enabling key" on page 674
Ê
14.4.3.3 Concluding steps
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
678
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
Average task duration:
5 minutes
125.
57.
62.
63.
"Opening the server" on
81.
TX300 S8 / RX350 S8