Installing A Bbu - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

1 Mounting position for first BBU / FBU
2 Mounting position for second BBU / FBU
3 Mounting position for third BBU / FBU
9.6.2

Installing a BBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
For further safety information, please refer to chapter
information" on page
9.6.2.1 Preliminary steps
"Disabling SVOM boot watchdog functionality" on page 127
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
"Removing the SAS expander board" on page 315
Ê
TX300 S8 / RX350 S8
45.
Upgrade and Maintenance Manual
Expansion cards and backup units
Average task duration:
5 minutes
"Opening the server" on
(if applicable)
"Important
435