Removing The Ultraslim Odd From The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

Accessible drives
▶
"Installing the PCI air duct" on page
▶
"Installing the system air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
12.6.2 Removing the ultraslim ODD from the 4x 3.5-inch
HDD extension box
Upgrade and Repair Unit
(URU)
Tools: Phillips PH0 / (+) No. 0 screw driver
Preliminary steps
▶
"Removing backup and optical disk media" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
The front cover only needs to be removed in order to remove or
install accessible drive dummy covers. If the HDD extension box will
be installed again after removing the ultraslim ODD, the front cover
can remain installed.
▶
"Removing the system air duct" on page
▶
"Removing the PCI air duct" on page
▶ If applicable,
"Removing the riser module" on page
▶ If applicable, remove the expansion card, see
card" on page 358.
▶ Remove the fan bridge, see
450
89.
68.
68.
82.
83.
49.
88.
"Handling the fan bridge" on page
Upgrade and Maintenance Manual
Hardware: 10 minutes
110.
50.
51.
67.
86.
"Removing an expansion
92.
TX2550 M5