Removing The Front Panel Module - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

13.3.1.2 Removing the front panel module

"Removing front panel cables from the system board" on page 603
Ê
"Removing the front panel module" on page 605
Ê
13.3.1.3 Preparing the front panel module
"Removing the front panel module cover" on page 608
Ê
Figure 496: Breaking out the front VGA cover plate
Ê Break out the front VGA cover plate on the front panel cover.
I
Please note that once removed, the front VGA cover plate cannot be
refitted.
TX300 S8 / RX350 S8
Upgrade and Maintenance Manual
Front panel and external connectors
633