2
Before you start
Before you start any upgrade or maintenance task, please proceed as follows:
Ê Carefully read the safety instructions in chapter
page
45.
Ê Make sure that all necessary manuals are available. Refer to the
documentation overview in section
page
41. Print the PDF files if required.
Ê Make yourself familiar with the procedure categories introduced in section
"Classification of procedures" on page
Ê Ensure that all required tools are available according to section
need at hand" on page
Installing optional components
Your server's operating manual gives an introduction to server features and
provides an overview of available hardware options.
Use the Fujitsu ServerView Suite management software and iRMC web
frontend to prepare hardware expansions. ServerView Suite documentation is
available online at
http://jp.fujitsu.com/platform/server/primergy/manual/). Please refer to the
following ServerView Suite topics:
– Operation
– Virtualization
– Tools for Service & Diagnostics
– Out-Of-Band Management
I
For the latest information on hardware options, refer to your server's
hardware configurator available online at the following address:
for the EMEA market:
http://ts.fujitsu.com/products/standard_servers/index.htm
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
TX300 S8 / RX350 S8
39.
http://manuals.ts.fujitsu.com
Upgrade and Maintenance Manual
"Important information" on
"Documents you need at hand" on
35.
(for the Japanese market:
"Tools you
33