Removing The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
7.4.6.2

Removing the 4x 3.5-inch HDD extension box

Ê Remove all cables from the 4x 3.5-inch HDD extension box backplane.
Ê If applicable, remove all cables from the slimline ODD.
Ê Disengage the accessible drive locking bar as described in section
the accessible drive locking bar" on page
Figure 203: Removing the HDD extension box
Ê Carefully pull the 4x 3.5-inch HDD extension box out of its installation bays.
Ê Engage the locking bar as described in section
locking bar" on page
TX300 S8 / RX350 S8
93.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
91.
"Closing the accessible drive
"Opening
299