Installing The Modular Lan Controller - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Expansion cards and backup units
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN controllers" on page
9.3 Modular LAN controller in PCI slot 1
I
PCI slot 1 is the preferred slot for Modular LAN controllers with NCSI
connector.
Figure 248: Modular LAN controller D2755
9.3.1

Installing the Modular LAN controller

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
364
361.
Upgrade and Maintenance Manual
"Note on network
157.
Average task duration:
10 minutes
TX300 S8 / RX350 S8