Removing And Preparing The Front Panel Module - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Front panel and external connectors

13.3.2.2 Removing and preparing the front panel module

"Removing front panel cables from the system board" on page 603
Ê
"Removing the front panel module" on page 605
Ê
"Removing the front panel module cover" on page 608
Ê
13.3.2.3 Removing the VGA connector
Figure 504: Removing the front panel connector
Ê Remove the two hexagon bolts from the front VGA connector (1, see close-
up).
Ê Pull the front VGA cable out through the mounting bracket on the front panel
frame and remove it (2).
640 Upgrade and Maintenance Manual
TX300 S8 / RX350 S8