Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual page 712

Converting a tower server to a rack server
Figure 555: Removing the right side cover (C)
Ê Remove the three hooks on the right side cover from the slots on the upper
chassis edge:
Ê Using a slotted screw driver, slightly pry up on the middle hook until it
disengages (1).
Ê Pull up on both ends of the right side cover to remove the left and right
hooks from the slots on the upper chassis edge (2).
712 Upgrade and Maintenance Manual
TX300 S8 / RX350 S8