Figure 528: Onboard SAS enabling key mounting location
Ê Connect the onboard SAS enabling key to system board connector
UGP-ROM.
14.4.1.3 Concluding steps
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
TX300 S8 / RX350 S8
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
System board and components
675