Cabling The 8X 2.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 205: Inserting the HDD extension box
Ê Insert the 8x 2.5-inch HDD extension box into installation bays 2 and 3 and
carefully push in until the front screw hole on the front panel frame lines up
with the centering pin on the locking bar.
Ê Engage the locking bar as described in section
locking bar" on page
7.4.8.4

Cabling the 8x 2.5-inch HDD extension box

Ê Connect SAS and power cables to the 8x 3.5-inch HDD SAS backplane as
described in section
page 200.
304
93.
"24x 2.5-inch HDD / SSD SAS backplane cabling" on
Upgrade and Maintenance Manual
"Closing the accessible drive
TX300 S8 / RX350 S8