Sas Backup Drives With Separate Power Supply - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 415: Routing cables
Ê Run the USB and power cables through the cable clamps (see arrows) as
shown.

SAS backup drives with separate power supply

12.2.4.3
I
This description applies to the following LTO drive types:
– LTO3
– LTO4 (Quantum)
Cable
(T26139-)
SAS Backup Drive
SAS / Power cable
Y3969-V401
Backup Drive Power
Cable
Y4029-V1
1
Requires installed Onboard SAS enabling key (see section
enabling key" on page
TX300 S8 / RX350 S8
Cabling
from
list no.
SAS backup drive
7 (P1, 22-pin
connector)
5 SAS backup drive
673)
Upgrade and Maintenance Manual
Accessible drives
to
System board
connector SAS 1-4
(P2, 36-pin Mini SAS
1
connector)
System board
connector PWR
HDD / ODD
(P1, 4-pin connector)
"Installing the onboard SAS
Cabling
plan
16.2.1
16.2.3
543