Front Vga Connector; Installing The Front Vga Connector - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Front panel and external connectors
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN controllers" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
13.3

Front VGA connector

13.3.1 Installing the front VGA connector

Upgrade and Repair Unit
(URU)
Tools: – Slotted screw driver for breaking out the front VGA cover plate
– Socket screw driver (5 mm)
13.3.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 125
Ê
"Locating the defective server" on page 57
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
632
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
157.
Average task duration:
10 minutes
TX300 S8 / RX350 S8