Concluding Steps - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 213: Installing accessible drive covers
Ê Remove the SAS expander board from the chassis
Ê Change SAS cabling according to the new server configuration as described
in sections "2.5-inch HDD / SSD configurations" on page 185
HDD configurations" on page
7.5.2.3

Concluding steps

"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task:
TX300 S8 / RX350 S8
241.
"Resuming BitLocker functionality" on page 152
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
and "3.5-inch
317