Installing Accessible Drive Dummy Covers - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Accessible drives
Ê Carefully pull the accessible drive out of its installation bay.
Ê Engage the locking bar as described in section
locking bar" on page

12.3.3 Installing accessible drive dummy covers

Ê Install accessible drive filler covers as described in section
filler covers" on page
Ê Install accessible drive covers as described in section
covers" on page
12.3.4 Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
Ê Verify if your backup software solution requires additional configuration after
installing, removing or replacing an accessible drive as described in section
"Verifying and configuring the backup software solution" on page
548
93.
94.
96.
Upgrade and Maintenance Manual
"Closing the accessible drive
"Accessible drive
"Accessible drive
TX300 S8 / RX350 S8
139.