Installing The 4X 3.5-Inch Hdd Extension Box - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
7.4.5

Installing the 4x 3.5-inch HDD extension box

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)
7.4.5.1 Preliminary steps
"Suspending BitLocker functionality" on page 125
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
7.4.5.2 Removing accessible drive dummy covers
Ê Remove accessible drive filler covers from the required bays as described
in section "Accessible drive filler covers" on page
Ê Remove accessible drive covers as described in section
covers" on page
7.4.5.3 Installing the slimline ODD into the HDD extension box
Ê If applicable, install the slimline ODD into the new 2x 3.5-inch HDD
extension box as described in section
HDD extension box" on page
TX300 S8 / RX350 S8
96.
589.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Average task duration:
10 minutes
94.
"Installing the slimline ODD into the
"Accessible drive
295