Replacing Memory Modules - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Main memory
10.4

Replacing memory modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
10.4.1 Preliminary steps
Ê Identify the defective memory slot using the server management software.
"Suspending BitLocker functionality" on page
Ê
"Disabling SVOM boot watchdog functionality" on page
Ê
"Locating the defective server" on page
Ê
"Shutting down the server" on page
Ê
"Disconnecting the server from the mains" on page
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page
Ê
Ê Locate the defective memory module using the onboard Local Diagnostic
LEDs as described in section
page 779.
482
"Onboard indicators and controls" on
Upgrade and Maintenance Manual
Average task duration:
10 minutes
125.
57.
62.
63.
"Opening the server" on
81.
127.
TX300 S8 / RX350 S8