Installing Accessible Drive Dummy Covers - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Accessible drives

12.7.2.4 Installing accessible drive dummy covers

I
if the 4x 3.5-inch HDD extension box is to be reinstalled in the system,
the following description does not apply. Please proceed as described in
section "Installing the 4x 3.5-inch HDD extension box" on page
Installing accessible drive filler covers
Ê Install accessible drive filler covers (C26361-K644-C933) into the empty
installation bays 1, 2 and 3 as described in section
covers" on page
V
CAUTION!
Always replace filler covers into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
Installing accessible drive covers
Ê Install accessible drive covers (C26361-K644-C60) into installation bays 1,
2 and 3 of the front cover as described in section
on page 96.
12.7.2.5 Installing the 4x 3.5-inch HDD extension box
Ê If the 4x 3.5-inch HDD extension box is to be reinstalled in the system,
prepare the accessible drive mounting brackets and install the extension box
into installation bays 1, 2 and 3 as described in section
inch HDD extension box" on page
12.7.2.6 Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
598
94.
Upgrade and Maintenance Manual
"Accessible drive filler
"Accessible drive covers"
296.
296.
"Installing the 4x 3.5-
TX300 S8 / RX350 S8