Handling Processor Heat Sinks - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Processors
11.5

Handling processor heat sinks

Upgrade and Repair Unit
(URU)
Field Replaceable Unit
(FRU) if thermal paste is involved
Tools: Phillips PH2 / (+) No. 2 screw driver
11.5.1 Preliminary steps
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page 81
Ê
518 Upgrade and Maintenance Manual
Average task duration:
15 minutes
"Opening the server" on
TX300 S8 / RX350 S8