Removing The Tpm Board - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

System board and components
"Locating the defective server" on page 57
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Open the side / top cover as described in section
page 68.
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê

14.3.2.2 Removing the TPM board

Ê Remove the system board as described in section
board" on page
Ê Lay the system board on a soft, antistatic surface with its component side
facing down.
668
687.
Upgrade and Maintenance Manual
"Opening the server" on
"Removing the system
TX300 S8 / RX350 S8