Front panel and external connectors
13.2
Front LAN connector
13.2.1 Installing the front LAN connector
Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver for breaking out the front LAN cover plate
13.2.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 125
Ê
"Locating the defective server" on page 57
Ê
"Shutting down the server" on page 62
Ê
"Disconnecting the server from the mains" on page 63
Ê
Ê When working on a rack-mounted server:
"Extending / removing the server from the rack" on page 64
Ê Bring the server to its horizontal position.
"Opening the server" on page 68
Ê
"Removing the system air duct" on page 81
Ê
"Removing the system fan holder" on page 330
Ê
13.2.1.2 Removing the front panel module
"Removing front panel cables from the system board" on page 603
Ê
"Removing the front panel module" on page 605
Ê
13.2.1.3 Preparing the front panel module
"Removing the front panel module cover" on page 608
Ê
618
Upgrade and Maintenance Manual
Average task duration:
10 minutes
TX300 S8 / RX350 S8