Sas Expander Board; Installing The Sas Expander Board - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

7.4.10.2 Removing the 8x 2.5-inch HDD extension box
Ê Unlock and pull the 8x 2.5-inch HDD extension box out of its installation bays
as described in section
page 306.
7.4.10.3 Installing the 8x 2.5-inch HDD extension box
Ê Install the new 8x 2.5-inch HDD extension box as described in section
"Installing the 8x 2.5-inch HDD extension box" on page
7.4.10.4 Concluding steps
"Installing the system fan holder" on page 331
Ê
"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê Reinstall all hard disk drives into their original slots in the HDD extension box
as described in section
page 207.
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
"Connecting the server to the mains" on page 118
Ê
7.5

SAS expander board

7.5.1

Installing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: tool-less
TX300 S8 / RX350 S8
"Removing the 8x 2.5-inch HDD extension box" on
"Installing 2.5-inch HDD / SSD modules" on
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
Average task duration:
10 minutes
302.
309