Concluding Steps - Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual

Figure 257: Connecting the NCSI sideband cable to the system board
Ê Connect the loose end of the NCSI sideband cable to the system board:
Connector
NC-SI
9.3.1.5

Concluding steps

"Installing the system air duct" on page 83
Ê
"Closing the server" on page 98
Ê
Ê When working on a rack-mounted server:
"Mounting the server in the rack" on page 115
Ê Reconnect all external cables to the replaced expansion card.
TX300 S8 / RX350 S8
Cable
NCSI sideband cable T26139-Y4015-V101
Upgrade and Maintenance Manual
Expansion cards and backup units
371