Fujitsu PRIMERGY TX300 S8 Upgrade And Maintenance Manual page 406

Expansion cards and backup units
Ê If applicable, power cabling of a second GPGPU / coprocessor card is
performed according to the primary card:
– For Intel Xeon Phi 5110P and Nvidia cards:
Cable
1
T26139-Y3946-V701
2
I
For further information, please refer to cabling plan
standard GPGPU / coprocessor cards" on page
– For Intel Xeon Phi 3120P / 31S1P / 7120P cards:
Cable
1 T26139-Y3946-V701
2 T26139-Y3952-V701
I
In case of Xeon Phi 3120P / 31S1P / 7120P cards, the standard
HDD power cable T26139-Y3952-V601 is replaced by power
cable T26139-Y3952-V701.
For further information, please refer to cabling plan
high performance GPGPU / coprocessor cards" on page
406 Upgrade and Maintenance Manual
Connector
8-pin connector
6-pin connector
Connector
8-pin connector
6-pin connector P2
"Cabling of
757.
"Cabling of
758.
TX300 S8 / RX350 S8