Installation And Connection; Preparation To Connect - Ikegami Editcam 3 DNS-33W Operation Manual

3.

INSTALLATION AND CONNECTION

This chapter explains how to install and connect the camera equipment.

3.1 Preparation to Connect

3.1.1 Making Sure that Power Switch is Turned OFF
Make sure that the power switch is turned OFF when the camera and peripheral equipment are connected. For the power switch
and turning off procedure of peripheral equipment, refer to the manual of each peripheral equipment.
3. INSTALLATION AND CONNECTION
G OU U
ON OFF
POWER
VF
CHARA
POWER Switch
DNS-33W 0503 VOL1 (E)
3 - 1
DNS-33W