System Setup Menu - Ikegami Editcam 3 DNS-33W Operation Manual

6 - 10 6. SETTINGS AND ADJUSTMENT OF RECORDER SECTION
6.4.3 NAVIGATION Menu
CLIP POSITION :
1
PRJ
START +00 :00 :00 :00
MARK IN OFFSET :
2
AUD
- 10 frames
MARKOUT OFFSET :
3
TC
- 4 frames
1 CLIP POSITION
Sets a position in a clip to be jumped when a clip is
selected.
Setting Value
Jumps to the beginning of the clip
START
IN Jumps to the specified IN point of the clip
OUT Jumps to the specified OUT point of the
clip
END Jumps to the end of the clip
2 MARK IN OFFSET
Sets the offset of the mark IN point (-128 to 127).
3 MARKOUT OFFSET
Sets the offset of the mark OUT point (-128 to 127).
4 Clip Position Set Button
Sets the offset from the position set by "CLIP
POSITION".
5 UP
Returns to the "RECORD/PLAYBACK" menu.
DNS-33W
4
UP
5
Description
DNS-33W 0503 VOL1 (E)

6.5 SYSTEM SETUP Menu

Pressing the "SYS" button on the "BASE" menu displays
"SYSTEM SETUP" menu.
INFO
INF
1
TIME &
TOD
2
DATE
OPERATIONS
OPS
3
1 INFO
Moves to the "INFO" menu.
2 TIME & DATE
Moves to the "TIME & DATE" menu.
3 OPERATIONS
Moves to the "OPERATIONS" menu.
4 ENVIRON
Moves to the "ENVIRON" menu.
5 NETWORK
Moves to the "NETWORK" menu.
Normally, setting this menu is not necessary.
6 TOUCH SCREEN
Moves to the "TOUCH SCREEN" menu.
7 UP
Returns to the "BASE" menu.
ENVIRON
ENV
4
NETWORK
NET
5
TOUCH
TS
6
SCREEN
UP
7