Viewfinder (Vf15-32A-S) - Ikegami Editcam 3 DNS-33W Operation Manual

2 - 14 2. NAME AND FUNCTION

2.6 Viewfinder (VF15-32A-S)

This section explains the names and functions of the viewfinder (VF15-32A-S) parts.
1
11
4 5 6
1 VF Cable
Used to connect the VF (VF15-32A-S) to the camera.
2 EYEPIECE Release Lever
Used to release the eyepiece when the inside of the VF
has to be cleaned.
3 Diopter Adjustment Lever
Adjusts visibility so that images on the VF can be
sharpened according to a person's eyesight. Adjustment is
performed by sliding the lever to the left or right while
pushing it in slightly.
4 PEAKING Knob
Adjusts the PEAKING level to make images on the VF
sharper so that focus can be optimized. This adjustment
has no effect on the OUTPUT signal of the camera.
5 CONTRAST Knob
Adjusts contrast of images on the VF. This adjustment
has no effect on the OUTPUT signal of the camera.
6 BRIGHTNESS Knob
Adjusts brightness of images on the VF. This adjustment
has no effect on the OUTPUT signal of the camera.
7 ZEBRA Switch
Used to turn ON/OFF the zebra indicator. By turning this
switch ON, zebra pattern is displayed on the VF when the
video level is higher than the set value.
DNS-33W
10
9
7 8
DNS-33W 0503 VOL1 (E)
1
2
2
1 VF Cable
2 EYEPIECE Release Lever
3 Diopter Adjustment Lever
4 PEAKING Knob
5 CONTRAST Knob
6 BRIGHTNESS Knob
Setting Value
Zebra pattern is displayed.
ON
Zebra pattern is not displayed.
OFF
8 TALLY Switch
Controls the FRONT TALLY lamp.
Setting Value
Front tally lamp gets brighter when it is on.
HIGH
OFF
Front tally lamp is always off.
LOW Front tally lamp gets dimmer when it is on.
9 FRONT TALLY Lamp
Lights during VTR recording or when R TALLY is
entered in various extension equipment. It does not light
when the TALLY switch is set to OFF.
10 REAR TALLY Lamp (with Switch)
The REAR TALLY lamp is interlocked with the R
TALLY indicator of the VF, and lights during VTR
recording or when R TALLY is entered in various
extension equipment. Since REAR TALLY lamp serves as
the switch, it can be turned ON/OFF by sliding.
11 MIC HOLDER Attaching Mount
Used to attach the external microphone holder (option).
3
7 ZEBRA Switch
8 TALLY Switch
9 FRONT TALLY Lamp
10 REAR TALLY Lamp
(with Switch)
11 MIC HOLDER
Attaching Mount
Description
Description