Ikegami Editcam 3 DNS-33W Operation Manual page 72

4 - 12 4. OPERATION
4.10.2 Display Changing
This section explains the changing method as the operation
common to all the screens.
1. Touch the LCD while the Status screen is displayed on it.
The display changes to the "BASE" menu.
AUDIO / VIDEO
A/V
DISK OPERATIONS
DSK
RECORD / PLAYBACK
R/P
SYSTEM SETUP
SYS
2. Touch the desired item.
The display changes to the sub menu screen. Displayed
content on this sub menu screen differ according to each
of the setting items.
PROJECT
PRJ
VIDEO
VID
AUDIO
AUD
TIMECODE
TC
A sub menu screen may subordinate another sub menu
screen according to the setting items.
3. By touching the "UP" button, the display returns to the
previous screen. By touching the UP key while the
SHIFT key is pressed, the display returns to the Status
screen.
Notice
By touching the REC key or the PLAY key, the
display automatically returns to the Status screen.
4.10.3 Settings and Input
This section explains the setting and input methods as the
operation common to all the screens. Each of the setting
items has the three types of the methods: Button Selection,
Number Input and Character Input.
Button Selection
Change the setting by pressing the button assigned to the
item to be selected.
(Screen example: PLAYBACK menu)
DNS-33W
UP
SWITCHER :
CAMERA
TEST ON
UP
DNS-33W 0503 VOL1 (E)
AUDIO SCRUB :
PRJ
0 frames
REVIEW LENGTH :
AUD
5s
PLAY CLIPS IN/OUT :
TC
- -
Each time the button is pressed, the display changes
--
in the order ON
Number Input
1. By pressing the button assigned to the item to be set,
highlight the item name.
(Screen example: RECORD menu)
RETROLOOP LENGTH :
A/V
0 : 15 mss
TIMELAPSE RECORD :
DSK
00 :00 :00 :01
TIMELAPSE OUT OF :
R/P
00 :00 :00 :04
2. Change the number by pressing the FRAME key (< >),
the PRIOR key (|<<), the NEXT key (>>|), the REW key
(<<<) or the FF key (>>>) on the control switch panel.
The numbers are changed by pressing each of the above
keys as the followings.
Operated Key
< >
|<< >>|
<<< >>>
SHIFT + <<< >>>
RETROLOOP LENGTH :
A/V
0 : 15 mss
TIMELAPSE RECORD :
DSK
00 :00 :00 :01
TIMELAPSE OUT OF :
R/P
00 :00 :00 :04
Set values by
operating keys.
3. By pressing the button of the item to be set again, the
input number is determined.
When the "CLR" button is pressed before determination,
the input number will be cancelled.
UP
ON.
UP
Setting Description
Changes the first digit
Changes the second digit
Changes the third digit
Changes the fourth digit
CLR
When the "CLR" button is pressed
before determination, the input number
reverts back to the former number.
Highlighted display and the selection
are also canceled.